Product Description
Halogen Free Busbar Heat Shrink Tubing
Halogen Free Busbar Heat Shrink Tubing known as copper bar protection tube, is made by cross-linked environmental protection polyolefin PE heat shrinkable materials which is bombarded by high power electron beam. High Voltage Heat Shrink Busbar Tubing with good resistance to bending and scratching, high insulation strength and resistance to electric carbon mark, Busbar Heat Shrink Tubing, Large Energy Heat Shrink Tubing applies to switchgear, substation bus, busbar, electrical equipment for anti-corrosion and insulation protection. Thick Wall Heat Shrink Tubing, Heat Shrink Tubing for Busbar it`s widely used in electric power industry.
Energy Heat Shrink Tubing, Heat Shrink Tubing it restricts the hazardous substance in PBB, PBBD, PBBE and other heavy metal, and supplies high dielectric strength and voltage withstand performance. It prevents bus-bar from chemical corrosion effected by strong acid, alkali, salt etc.
Features & Benefits:
with superior insulated and chemical properties.
meets:GB/T 1059-2007
Shrink ratio:2:1 (1 kV, 35 kV, 10 kV busbar )
Tracking resistant, low smoke emitting, high strength, flexible, flame retardant,resistance to flame and corrosion.
Min. shrink temperature:≥84°C
Min. full recovery temperature:≥120°C
Continuous operating temperature:-55 degrees C~125 degrees C
RoHS compliant 1KV Busbar heat shrinkable electrical tubes
Standard colors:red, yellow, green and other colors available on your request
Up to standard: Approvals
|
Product Property
|
Performance requirements
|
Test Date
|
|
Cold Bending flexibility
|
-30℃×4H
|
No cracking
|
|
Tensile strength
|
ASTM D 2671
|
14.3Mpa
|
|
Tensile strength after heat aging
|
ASTM D 2671 / 158℃, 168 hrs (7 days)
|
14.0 MPa
|
|
Max. Elongation
|
ASTM D 2671
|
450%
|
|
Elongation after heat aging
|
ASTM D 2671/158℃, 168 hrs (7 days)
|
≥470%
|
|
Low temperature flexibility
|
ASTM D 2671,
|
PASS
|
|
Volume resistance
|
IEC 93
|
≥1014Ω.cm
|
|
withstand voltage
|
UL224
|
2500V.60sec
no breakdown
|
|
Flammability
|
UL224
|
VW-1
|
Application:
|
Part Number
|
Basbar width(MM)
|
As supplied(MM))
|
After recovered(MM)
|
Standard length (m/roll)
|
|
|
|
Inner diameter (D)
|
Wall thickness (T)
|
Inner
diameter (d)
|
Wall
thickness (t)
|
25
|
|
MP-10KV 15/7.5
|
15/12
|
≥15
|
1.0±0.30
|
≤6.0
|
2.5±0.20
|
25
|
|
MP-10KV 20/10
|
20/15
|
≥20
|
1.0±0.30
|
≤8.0
|
2.5±0.20
|
25
|
|
MP-10KV 25/12.5
|
25/18
|
≥25
|
1.0±0.30
|
≤10.0
|
2.5±0.20
|
25
|
|
MP-10KV 30/15
|
30/20
|
≥30
|
1.0±0.30
|
≤12.0
|
2.5±0.20
|
25
|
|
MP-10KV 40/20
|
40/30
|
≥40
|
1.2±0.30
|
≤16.0
|
2.8±0.30
|
25
|
|
MP-10KV 50/25
|
50/35
|
≥50
|
1.2±0.30
|
≤20.0
|
2.8±0.30
|
25
|
|
MP-10KV 60/30
|
60/45
|
≥60
|
1.2±0.30
|
≤24.0
|
2.8±0.30
|
25
|
|
MP-10KV 65/32.5
|
65/45
|
≥65
|
1.2±0.30
|
≤26.0
|
2.8±0.30
|
25
|
|
MP-10KV 70/35
|
70/50
|
≥70
|
1.2±0.30
|
≤28.0
|
2.8±0.30
|
25
|
|
MP-10KV 75/37.5
|
75/50
|
≥75
|
1.2±0.30
|
≤30.0
|
2.8±0.30
|
25
|
|
MP-10KV 80/40
|
80/55
|
≥80
|
1.2±0.30
|
≤32.0
|
2.8±0.30
|
25
|
|
MP-10KV 85/42.5
|
80/65
|
≥85
|
1.2±0.30
|
≤34.0
|
2.8±0.30
|
25
|
|
MP-10KV 100/50
|
100/75
|
≥100
|
1.2±0.30
|
≤40.0
|
2.8±0.30
|
25
|
|
MP-10KV 120/60
|
120/85
|
≥120
|
1.2±0.30
|
≤48.0
|
2.8±0.30
|
25
|
|
MP-10KV 150/85
|
.png)
Contact Now
