Product Description
Thin Wall Heat Shrink Cable Sleeve
Thin Wall Heat Shrink Tubing is made of radiation cross-linked polyolefin, Thin Heat Resistant Shrink Tubing has excellent physicochemical and electrical properties. Ultra Thin Wall Heat Shrink Tubing,PE Heat Shrinkable Tube can reliably insulate cable and wire splices and terminations, effectively protect soldered joint and provides good mechanical protection for wire harness in electronic, communications, automotive, shipping and aircraft manufacturing industries.
Thin Wall Polyolefin Heat Shrink Tubing,Waterproof Heat Shrink Tubing is very flexible and is easily marked by hot-stamp or printwheel methods.
Features:
Meets UL 224, CAN / CSA C22.2 NO198.1 -99
Heat shrink ratio: 2:1
Highly flame retardant , environmentally friendly
Min. shrink temperature : 84 °C
Min. full recovery temperature : 120°C
Continuous operating temperature : -55 °C ~ 125°C
RoHS Compliant
Standard Colors: black, white, red, yellow, green, blue .More colors are available upon request
Technical Data:
|
Properties
|
Typical Data
|
Test Method
|
|
Tensile strength
|
≥10.4MPa
|
ASTM D 2671
|
|
Elongation
|
≥200%
|
ASTM D 2671
|
|
Tensile strength after heat
|
≥7.3MPa
|
158℃×168h
|
|
Elongation after aging
|
≥100%
|
158℃×168h
|
|
Longitudinal change
|
-5%~+5%
|
ASTM D 2671
|
|
Flammability
|
VW-1
|
ASTM D 2671 C
|
|
Voltage withstand (Rated voltage, 600V)
|
2500V,1min without breakdown
|
UL 224
|
|
Heat shock
|
No track ,no drippings
|
UL 224,250℃×4h
|
|
Dielectric strength
|
≥15kV/mm
|
ASTM D 149
|
|
Volume resistivity
|
≥1014Ω.cm
|
IEC 60093
|
Structure:
.png)
Contact Now
